Description
DRYLOK® WetLook high-gloss sealer Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack and/or stain when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK® wet look high-gloss sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high-gloss, WetLook finish is desired.
| Application Method | : | Brush, Garden Spray, Pad Applicator, Squeegee |
| Application Temperature | : | 50 deg F |
| Base Type | : | Water |
| Boiling Point | : | 100 deg C |
| Compositions | : | Propylene Glycol |
| Coverage Area | : | 360 sq-ft/gal |
| Density | : | 1.02 g/L |
| Drying Time | : | 1 hr Touch, 4 hr Recoat |
| Finish | : | High-Gloss |
| Flash Point | : | 5001 deg C |
| Form | : | Liquid |
| Net Content | : | 1 gal |
| Odor/Scent | : | Amine |
| Resists | : | Chemical, Rust |
| Traffic Time | : | 72 to 96 hr |
| Viscosity | : | 12 to 18 s |
| pH Range | : | 8 |
